Izizathu zokuvela kwamaqamza emva kokudibana kwakhona okanye emva kwexesha elithile
1. Ukumanzisa komphezulu wefilimu ye-substrate kubi.Ngenxa yokuphathwa kakubi komhlaba okanye imvula yezongezo, ukumanzisa okungahambi kakuhle kunye nokugquma okungalinganiyo kwe-adhesive kubangela amaqamza amancinci.Ngaphambi kokudibanisa, ukunyanzeliswa komphezulu wefilimu ye-substrate kufuneka kuhlolwe.
2. Ukusetyenziswa kweglue okungonelanga.Ubukhulu becala kungenxa yokuba umphezulu we-inki awulingani kwaye unemingxuma, ukuze i-Adhesive ifunxwe.Olona xabiso lwe-Adhesive yokugquma kumphezulu we-inki luncinci, kwaye inani leglue elifakwe kwifilimu yokushicilela kunye nomphezulu we-inki enkulu kunye ne-inki engqindilili kufuneka yandiswe.
3. I-Adhesive ibuthathaka kumanzi kunye nokoma, okanye iqondo lobushushu kwindawo yokusebenza liphantsi kakhulu.Ukugqithiswa kweAdhesive kunye nokumanzisa okungahambi kakuhle kuyathandeka kumaqamza.I-Adhesive kufuneka ikhethwe kakuhle, kwaye i-Adhesive kufuneka ifudumale xa kuyimfuneko.
4. Xa i-Adhesive ixutywe namanzi, isiqulatho samanzi esinyibilikisiweyo esiphezulu,ukufuma komoya ophezulu kunye ne-substrate ephezulu yokufunxa ukufuma kunokwenza i-Adhesive iphendule ukuvelisa i-CO2 evaleleke kwi-membrane edibeneyo kwaye ibangele amaqamza.Ngoko ke, i-Adhesive kunye ne-solvent kufuneka ilawulwe kakuhle, kwaye i-nylon, i-Cellophane kunye ne-Vinylon ene-absorption ephezulu yomswakama kufuneka ivalwe ngokuqinileyo.
5. Iqondo lokushisa lokumisa liphezulu kakhulu kwaye ukomisa kukhawuleza kakhulu, okubangelwa ukugqabhuka okanye ukukhutshwa kwefilimu ye-Adhesive.Xa ubushushu becandelo lesithathu letonela lokumisa liphezulu kakhulu, i-solvent kwi-surface ye-Adhesive layer ikhupha ngokukhawuleza, okubangela ukunyuka kwendawo ekugxininiseni kwesisombululo seglue kunye ne-surface crusting.Xa ubushushu obulandelayo bungena ngaphakathi kwincamathelisa, isinyibilikisi esingaphantsi kwefilimu siya kuba ngumphunga, siqhawule ifilim kwaye senza icrater efana neringi, nayo ibangela ukuba umaleko wokuncamathelisa ungalingani.Opaque.
6.I-roller edibeneyo icinezelwe ngomoya, ibangela ukuba ama-bubbles abe khona kwifilimu edibeneyo.Ifilimu inobunzima obuphezulu kwaye kulula ukungena xa ubukhulu bukhulu.Okokuqala, lungisa i-angle yokusonga phakathi kwe-roller edibeneyo kunye nefilimu.Ukuba i-angle yokugoqa inkulu kakhulu, kulula ukubamba umoya, kwaye uzame ukungena kwi-roller edibeneyo kwindlela ye-tangent kangangoko kunokwenzeka;Okwesibini, i-flatness ye-anti roll substrate yesibini ilungile, njengemiphetho ekhululekile kunye nokungcangcazela kwefilimu.Emva kokungena kwi-roller edibeneyo, umthamo omkhulu womoya uya kubanjiswa ngokuqinisekileyo, ubangele ama-bubbles.
7. I-solvent eseleyo iphezulu kakhulu, kwaye i-solvent iyaphuphuma ukuze yenze amaqamza afakwe kwifilimu.Jonga rhoqo umthamo womoya wombhobho wokumisa.
Ixesha lokuposa: Jul-20-2023
